固体凝胶指甲胶
1️⃣ 轻轻打磨指甲表面，准备指甲。
2️⃣。 （可选）涂上一层薄薄的无酸底漆。风干即可。
3️⃣。涂上一层薄薄的凝胶底漆并固化 60 秒。擦掉粘性层。
4️⃣。用推杆挑出绿豆大小的凝胶。避免用手指过度摩擦。油脂和灰尘会降低凝胶的粘度！
5️⃣ 将凝胶球直接放在 Soft Gel Tip 或甲床上
6️⃣。从角质层区域开始一直到自由边缘，将 Soft Gel Tip 用力按压到甲床上，滚动直至其完全贴合到位。
7️⃣。使用清洁刷或不起毛的抹布清除多余的溢出边缘。
8️⃣。将软凝胶头按在指甲上并快速固化 5 秒，然后松开并再固化 120 秒。
固体凝胶指甲胶？指甲胶
✔️固体凝胶粘合剂
??无毒、无化学气味
??可模压 - 揉捏成任何 3D 形状
??与皮肤接触时无白色残留物
??位置可调直至固化
??使用 UV/LED 固化灯固化 ?
❌ 普通指甲胶
??留下白色残留物
??浓重的气味
??不持久
- Plant based gel
- Non harmful in contact with skin
- Strong hold, last up to 30 days
- No white residue
- Need to dry with UV/LED Gel Curing Lamp
1. Prep nail by gently buffing nail surface.
2. (Optional) Apply a thin layer of Acid-Free Primer. Air Dry will do.
3. Apply a thin layer of AS Base Coat and cure for 60secs. Wipe off the tacky layer.
4. Pick with a pusher a mung bean size gel. Avoid over rubbing with fingers. Grease and dust will reduce viscosity of the gel!
5. Place ball of gel on Soft Gel Tips or nail bed directly
6. Press Soft Gel Tips down firmly onto nail bed starting from the cuticle area to the free edge, using a rolling motion until it fits nicely in position.
7. Use a cleansing brush or Lint-Free Wipes to clean off any excess overflowing edges.
8. Pressing on the Soft Gel Tips onto the nail and flash cure for 5 secs before releasing and cure for another 120secs.
15毫升
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
| 0kg - 1kg | SGD 9 |
| 1.01kg - 2kg | SGD 15 |
| 2.01kg - 3kg | SGD 18 |
| 3.01kg - 4kg | SGD 21 |
| 4.01kg - 5kg | SGD 24 |
| 5.01kg - 10kg | SGD 34.50 |
| 10.01kg - 15kg | SGD 39.90 |
| 15.01kg - 20kg | SGD 45 |
| 20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
| 0kg - 1kg | SGD 21 |
| 1.01kg - 2kg | SGD 32.90 |
| 2.01kg - 3kg | SGD 45.50 |
| 3.01kg - 4kg | SGD 69.50 |
| 4.01kg - 5kg | SGD 75.90 |
| 5.01kg - 10kg | SGD 129.90 |
| 10.01kg - 15kg | SGD 159.90 |
| 15.01kg - 20kg | SGD 185.90 |
| 20.01kg - 25kg | SGD 210 |
| 25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
| Orders below SGD 40 | SGD 1.75 |
| Orders above SGD 40 | Free |
| Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
| 0kg - 1kg | SGD 9 |
| 1.01kg - 2kg | SGD 15 |
| 2.01kg - 3kg | SGD 18 |
| 3.01kg - 4kg | SGD 21 |
| 4.01kg - 5kg | SGD 24 |
| 5.01kg - 10kg | SGD 34.50 |
| 10.01kg - 15kg | SGD 39.90 |
| 15.01kg - 20kg | SGD 45 |
| 20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
| 0kg - 1kg | SGD 21 |
| 1.01kg - 2kg | SGD 32.90 |
| 2.01kg - 3kg | SGD 45.50 |
| 3.01kg - 4kg | SGD 69.50 |
| 4.01kg - 5kg | SGD 75.90 |
| 5.01kg - 10kg | SGD 129.90 |
| 10.01kg - 15kg | SGD 159.90 |
| 15.01kg - 20kg | SGD 185.90 |
| 20.01kg - 25kg | SGD 210 |
| 25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
| Orders below SGD 40 | SGD 1.75 |
| Orders above SGD 40 | Free |
| Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
