全息反光闪光凝胶面漆
【1】涂AS凝胶抛光底漆
【2】如果指甲脆弱,请涂上AS Gel Polish Reinforced Coat(可选)。
【3】涂上1至2层Gel Polish指甲油。每层后固化 60 秒。
?? ?? ???涂上厚厚的颜色层。 ???? ???? ???? ???? ??? ???,??? ???? ?? ???? ?? ??????。 ???? ?? ?? ???? ???? ??? ??? ???? ??? ??????? ?????? ??? ???? ??????? ?? ???? ???? ??????、?? ??? ???? ??????? ??? “??????” ???????
【4】 用 AS 凝胶抛光反光(全息或非全息)面漆密封。这些是不可擦拭的,因此不会有任何粘性层
❣️?????? ???:
这是凝胶指甲油系列,您需要 UV LED 固化灯来固化(干燥)凝胶。
⚠️*?? ??? ??????*
这些是凝胶指甲油,你会??? ??/?? ??? ???? ????固化/干燥抛光剂。每个步骤/应用后固化 60 秒。
⚠️*???你的家用LED灯
?如果您还没有的话,我们店里有“LED 固化灯”
??????:
15毫升
- A 3-step gel system that offers a highly pigmented, long lasting formula
- Smooth application
- Easy soak off with Acetone or Gel Remover.
1. Apply AS Gel Polish Base Coat
2. Apply AS Gel Polish Reinforced Coat (optional) if you have brittle nails.
3. Apply up to 2 layers of colours, but cure after each layer.
4. Seal with AS Gel Polish REFLECTIVE (holo or non) Top Coat. These are non-wipe so there will not be any tacky layers.
15毫升
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.