Pro Gel Lamp Light 48W
A 48W UV/LED nail lamp built around one practical feature: automatic hand recognition that starts curing the moment you put your hand in, no button press needed. Lightweight at 185g, USB-powered, and compatible with auxiliary battery, desktop, and charging adapter — so it works wherever you do.
- Wattage — 48W
- LED array — 24 LEDs, dual UV/LED light source for thorough curing
- Auto sensor — human body detection triggers curing automatically on hand insertion
- Timer display — digital display shows remaining cure time; press button to adjust
- Black interior floor — minimises light reflection to reduce eye fatigue during use
- USB powered — compatible with auxiliary battery, desktop, and charging adapter
- Weight — approx. 185g
- Includes — lamp body, USB cable, user manual
- KC Certified
- Connect the USB cable to the lamp and an adapter or power source.
- Press the button to set your preferred cure time.
- Insert hand — the auto sensor will begin curing immediately.
- Timer counts down on the display; lamp switches off automatically when complete.
- For 99-second continuous curing, insert hand without pressing any button.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
| 0kg - 1kg | SGD 9 |
| 1.01kg - 2kg | SGD 15 |
| 2.01kg - 3kg | SGD 18 |
| 3.01kg - 4kg | SGD 21 |
| 4.01kg - 5kg | SGD 24 |
| 5.01kg - 10kg | SGD 34.50 |
| 10.01kg - 15kg | SGD 39.90 |
| 15.01kg - 20kg | SGD 45 |
| 20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
| 0kg - 1kg | SGD 21 |
| 1.01kg - 2kg | SGD 32.90 |
| 2.01kg - 3kg | SGD 45.50 |
| 3.01kg - 4kg | SGD 69.50 |
| 4.01kg - 5kg | SGD 75.90 |
| 5.01kg - 10kg | SGD 129.90 |
| 10.01kg - 15kg | SGD 159.90 |
| 15.01kg - 20kg | SGD 185.90 |
| 20.01kg - 25kg | SGD 210 |
| 25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
| Orders below SGD 40 | SGD 3.99 |
| Orders above SGD 40 | Free |
| Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
Why Colours May Vary
Please note that product colour may vary from picture due to monitor resolution, lighting and application times. We try our best to reflect the product colour as true to actual item as possible. Below shows the effect of different lighting results for the same colour.
Application Times

Environmental Lighting

Lighting Difference

