Mr Nail Function Gel/ Tub
The Mr Nail salon professional series nail perfection with 15 functional gel tub polish. Ensure optimal superior adhesion, lasting shine, and durability. Featuring variety of Mr Nail Hard Gel Top, 3-in-1 Base, Builder, Non Wipe 3D Rhinestone and Candy gel allow you to create a wide range of stunning nail art design.
102 3-in-1 Base Coat: Combines base gel, builder gel, and nail tip adhesive. It has strong adhesion, nail protection, and can create a C-curve where applied thickly. Also great for adhering small decorations.
103 Builder Gel: Perfect for those who needs to enhances and reinforces weak and easily chipped nails. This builder gel helps to add structure and achieve the perfect C-curve with its remarkable self-leveling feature.
104 Diamond Top Coat: Clear and glossy, scratch-resistant, durable, and flexible without cracking. Gives a diamond-like shine that can lasts up to 45 days.
105 Hard Gel Top Coat: No fluorescence or additives. Nano crystal plating with a lotus leat structure for anti-dust and scratch resistance, providing a strong. lasting and smooth shield.
107 Painless Extension: Transparent and cures with zero pain. Easy to use with moderate flow, hard and flexible, not easy to break. Suitable for nail extension, hardening, and shaping.
108 5s Speed Cure Gel: No fluorescence or additives. Nano crystal plating with a lotus leat structure for anti-dust and scratch resistance, providing a strong. lasting and smooth shield.
109 Non-Wipe 3D Gel: A non-wipe formula with strong adhesion to hold nail charms or fine flocking powder. Its viscosity allows for 3D nail styling.
111 3D Candy Gel: Safe formula with elastic texture and high transparency. Soft, non-sticky, easy to mould, suitable for DIY, moulds, and textures.
1. Prep nail by gently buffing nail surface.
2. Apply Mr Nail 18 Equilibrium Bonder, to remove oil and moisture from the nail surface.
3. Before application, prep brush with desired gel to make application easier.
4. Apply a layer at the top of the nail first.
3. Then apply the gel over the entire nail.
4. For building structure, apply a small amount of gel, gently press and guide gel in a left to right motion.
5. Ensure the entire nail is evenly coated, then Cure under the Lamp.
Curing Time
- 5s Speed Cure Gel: 5s - 30s secs
- Adhesive/ Builder/ Top/ Base/ Reinforce/ 3D Gel: 30s - 60s - 120s secs
Daily Care
- Open a small opening in the seal of the jar to better protect the gel.
- Cover the jar immediately when not in use to prevent dust and curing.
30 mL
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
Why Colours May Vary
Please note that product colour may vary from picture due to monitor resolution, lighting and application times. We try our best to reflect the product colour as true to actual item as possible. Below shows the effect of different lighting results for the same colour.
Application Times
Environmental Lighting
Lighting Difference
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
Why Colours May Vary
Please note that product colour may vary from picture due to monitor resolution, lighting and application times. We try our best to reflect the product colour as true to actual item as possible. Below shows the effect of different lighting results for the same colour.
Application Times
Environmental Lighting
Lighting Difference
How to use
Apply base coat and cure for 60secs.
Apply up to 2 coats of colours, cure for 60secs after each coat.
Seal with Top Coat, cure for 60secs.