二合一凝胶彩色橡胶底漆
??'? ??? ???? ???? ????
?????? ?????? ?-??? ???? ??? ???? ???? ???? ???? ??? ??????????
??? ?? ???:
【1】准备指甲,轻轻打磨指甲表面
【2】清除指甲上的灰尘或油污残留物
【3】涂一层AS-ARE橡胶底漆凝胶抛光剂并固化120秒
【4】用 AS 凝胶抛光面漆密封 - 光泽/哑光或回火。
【5】UV/LED灯固化60秒
?? ?? ???涂上厚厚的颜色层。 ???? ???? ???? ???? ??? ???,??? ???? ?? ???? ?? ??????。 ???? ?? ?? ???? ???? ??? ??? ???? ??? ??????? ?????? ??? ???? ??????? ?? ???? ???? ??????、?? ??? ???? ??????? ??? “??????” ???????
❣️?????? ???:
这是凝胶指甲油系列,您需要 UV LED 固化灯来固化(干燥)凝胶。
⚠️*?? ??? ??????*
这些是凝胶指甲油,你会??? ??/?? ??? ???? ????固化/干燥抛光剂。每个步骤/应用后固化 60 秒。
⚠️*???你的家用LED灯
?如果您还没有的话,我们店里有“LED 固化灯”
??????:
15毫升
- Creates Natural C-Arc Apex and adds colour with just ONE application
- Medium viscosity
- Self-leveling
- Smooth out dents or uneven nail surfaces
- Creates strong bond between natural nail surface and gel polish
1. Prep nails by gently buffing the surface of your nail
2. Clean off any dust or oil residue from your nail
3. Apply a layer of AS-ARE Rubber Base Coat Gel Polish and cure for 120secs
4. Seal with AS Gel Polish Top Coat - Gloss/ Matte or Tempering.
5. Cure under UV/LED Lamp for 60secs
15毫升
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
Why Colours May Vary
Please note that product colour may vary from picture due to monitor resolution, lighting and application times. We try our best to reflect the product colour as true to actual item as possible. Below shows the effect of different lighting results for the same colour.
Application Times
Environmental Lighting
Lighting Difference
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
Why Colours May Vary
Please note that product colour may vary from picture due to monitor resolution, lighting and application times. We try our best to reflect the product colour as true to actual item as possible. Below shows the effect of different lighting results for the same colour.
Application Times
Environmental Lighting
Lighting Difference
How to use
Apply base coat and cure for 60secs
Apply up to 2 coats of colours, cure for 60secs after each coat.
Seal with Top Coat, cure for 60secs