Mr Nail Cat Eye Magnet Sets
Mr. Nail Cat Eye Magnet Tools are now available in mixed bundles of long and short cylinders and magnet bars, allowing you to create a variety of cat eye patterns. Mix and match the different pieces to create trending french, ovals, eyes, crisscrosses, diagonals and more! Use these tools with magnetic cat eye polishes for limitless creative possibilities.
- Magnetic Bars: Create clean straight velvety lines with one bar magnet or combine 2 to 3 magnets to easily create different diagonals, circles or black hole cat eye looks!
- Cylinder Magnet: Perfect for full wide cat eye effect, side lighting, french tip or pair even paper clip to create the trendy cat eye heart effect.
- Long Cylinder Magnet: Comprised of four smaller cylinder magnets in one, this magnetic tool amplifies its magnetic force up to five times. It allows you to create endless cat eye effects from both ends of the tool as well as from the center.
Please note: These magnets are very strong hence they are tape down to the packaging to prevent them from snapping together. When opening the package please be careful to remove them one by one. Releasing them all at once might result in them snapping them together or onto metal surfaces and this may cause the magnet bars to break.
The closer the distance the more obvious the cat eye effect will be. Hold the magnet in one direction for at least 5 -10 seconds. If you make a mistake, there is no need to wipe off, just reapply and start over.
1. Apply Mr Nail Gel Polish Base Coat
2. Apply Mr Nail Gel Polish Reinforced Coat (optional) if you have brittle nails.
3. Apply a layer of Magnetic Cat Eye Gel Polish and cure for 60secs.
5. Place Magnetic stick 1-3mm above the nail surface to create the desired pattern.
Cure under UV/LED lamp for 60secs
6. Seal with Mr Nail Gel Polish Top Coat - Gloss or Tempering.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
How to use
Apply the cat eye gel
Hold the magnetic stick 1-3mm above the nai lsurface to create the desired pattern
Cure under the lamp for 60 seconds, then apply the top coat
Distance between Magnet & Gel
For stronger magnetic force, the magnet should be placed 1 to 3mm away from the gel. This will create a more distinct cat eye effect
If placed too far away from the gel (4-9mm), this may result in spotty finish.