PolyGel 扩展套件
⭐ 如果您想要长指甲但难以长出天然指甲,那么聚合物指甲延长片是一种很好的指甲增强剂。
⭐ 与亚克力相比更灵活、更轻,但是
⭐ 比普通凝胶或软凝胶延长管更硬
???? ?? ??????:
【7】x 聚延伸凝胶颜色 - 7 种颜色混合(每种 15ml)
【1】x SunMini UV/LED 固化灯
【1】x 滑液 - 20ml
【1】x 双面指甲刷/刮刀
【1】x 100 件指甲模(10 种尺寸)
【1】x NJ 凝胶抛光底油 (8.5ml)
【1】x NJ 凝胶抛光光泽面漆 (8.5ml)
【1】x 亚克力指甲夹
【1】x 指甲锉
【1】x 袋
【1】x 使用说明书
?? ??? ?? ???:
【01】准备工作,抛光指甲表面并去除酒精垫上的任何天然指甲油脂。
【02】涂上凝胶底漆并固化60秒。
【03】取适量Polygel涂抹于指甲形状上
【04】将刷子浸入滑爽溶液中,使聚合物凝胶均匀、光滑地涂抹。
【05】5将指甲模放在指甲上并用夹子固定,然后固化。
【06】UV/LED固化灯固化120秒
【07】将指甲从一侧松开到另一侧,然后将其剥离。
【08】将指甲修整并抛光至所需的长度和形状。
【09】涂面漆并固化60秒
? ???? ???: 2 分钟
❣️?????? ???:
您将需要 UV LED 固化灯来固化(干燥)凝胶。
⚠️*?? ??? ??????*
这些是凝胶指甲油,你会??? ??/?? ??? ???? ????固化/干燥抛光剂。每个步骤/应用后固化 60 秒。
⚠️*???你的家用LED灯
?如果您还没有带 UV/LED 固化灯的 oneCure,我们商店中的“LED 固化灯”
- 7x Poly Extension Gel Colours - Mix of 7 colours (15ml each)
- 1x SunMini UV/LED Curing Lamp
- 1x Slip Solution - 20ml
- 1x Dual-Sided Nail Brush/Scraper
- 1x 100pcs Nail Forms (10 sizes)
- 1x NJ Gel Polish Base Coat (8.5ml)
- 1x NJ Gel Polish Gloss Top Coat (8.5ml)
- 1x Acrylic Nail Clip
- 1x Nail Shaping File
- 1x Pouch
- 1x Instructions Manual
1. To prep, buff surface of nail & remove any natural nail grease of alcohol pad.
2. Apply gel base coat and cure for 60secs.
3. Apply a fitted amount of polygel on the nail form
4. Dip brush into slip solution to spread the polygel evenly and smoothly.
5. 5Place nail form onto nail and clip to secure form before curing.
6. Cure under UV/LED Gel Curing Lamp for 120secs
7. Loosen the nail form from side to side before peeling it off.
8. Shape and buff nail to desired length and shape.
9. Apply top coat and cure for 60secs
8.5毫升
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 7 business days.
Shipping Fees to Malaysia:
0kg - 1kg | SGD 9 |
1.01kg - 2kg | SGD 15 |
2.01kg - 3kg | SGD 18 |
3.01kg - 4kg | SGD 21 |
4.01kg - 5kg | SGD 24 |
5.01kg - 10kg | SGD 34.50 |
10.01kg - 15kg | SGD 39.90 |
15.01kg - 20kg | SGD 45 |
20.01kg - 30kg | SGD 59.90 |
Currently we offer shipping to Philippines, Indonesia and Thailand.
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will 7-14 business days.
Shipping Fees to Asia:
0kg - 1kg | SGD 21 |
1.01kg - 2kg | SGD 32.90 |
2.01kg - 3kg | SGD 45.50 |
3.01kg - 4kg | SGD 69.50 |
4.01kg - 5kg | SGD 75.90 |
5.01kg - 10kg | SGD 129.90 |
10.01kg - 15kg | SGD 159.90 |
15.01kg - 20kg | SGD 185.90 |
20.01kg - 25kg | SGD 210 |
25.01kg - 30kg | SGD 288.90 |
All orders received will be processed and shipped out within 1-2 business days. Deliveries by our logistics partners will take up to 2 business days.
Orders below SGD 40 | SGD 1.75 |
Orders above SGD 40 | Free |
Store pickup - Weekdays 10am - 8pm | Free |
*Store pickup is available in Singapore only (Weekdays only)
Why is there pockets of bubbles after curing?
If air bubbles occurs after curing your gel, most of the time it would mean that the gel layer that's been applied is too thick. For opaque colours, or colours that has fuller coverage, always apply thin layers and cure each layer before piling on the next. This is to ensure that the light hits the entire layer and dries them before the next layer.
Is it necessary to use Base Coat/ Top Coat?
Gel base coat are designed to bond tightly with your nail plate and then act as an anchor to adhere your coloured gel polish.
Gel top coat (gloss or matte) is the final layer to protect and seal the colour. If you are using a non-wipe top, it will be a non-tacky, smooth glossy hard gel finish.
If you are using a wipe formula , you will need to use alcohol wipe to clean off the tackiness of the top coat.
Why is the base coat so sticky/ tacky?
All of your gel coats will feel tacky after curing. It’s the tackiness which allows each subsequent coat to stick.